2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
7-53.1. STROBE LIGHT ASSEMBLY REPAIR
This task covers:
c. Follow-On Maintenance
Engine shut off (TM 9-2320-360-10)
Tags, Identification (Item 32, Appendix C)
Parking brake on (TM 9-2320-360-10).
Gasket (2) (Item 34.1, Appendix G)
Locknuts (3) (Item 72, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Capacitor Inside light assembly may
contain high voltage. Ensure light
has been turned off at least five
minutes before servicing. Failure to
comply may result in Injury to
(1) Remove screw (1), two preformed
packings (2), clamp ring (3), and lens (4)
from base (5).
Do not touch glass portion of strobe
tube with bare hands. Oil from your
skin will shorten the life of the bulb.
Handle the bulb only by the black
base of the strobe tube.
(2) Remove strobe tube (6) from circuit board
(3) Remove fuse (8) from circuit board
(4) Remove gasket (9) from base (5).
(5) Remove gasket (10) from lens (4).
Change 3 7-152.1
|Integrated Publishing, Inc.|