 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(5) Install two jumper wire assemblies (11) on
clearance light wire harness (12).
(6) Install two jumper wires (11) on cab wire
harness (13).
NOTE
Plastic
cable
ties
should
be
positioned in
locations marked
during removal.
(7) Secure jumper wire assemblies (11) with
plastic cable ties (14).
(8) Secure clearance light wire harness (12)
to sun visor (1) with eight clips (15).
(9) Push in eight center pins (16) to fasten
clips (15) to sun visor (1).
(10) Install quickedge molding (17) on cover
plate (18).
CAUTION
Quickedge
molding
must
be
positioned over wire assemblies.
Failure to comply may result in
damage to wire assemblies.
(11) Install cover plate (18) on sun visor (1)
with five washers (19), new lockwashers
(20), and screws (21) with aid of assistant.
NOTE
Lamps and light covers for blackout
clearance lights and clearance lights
are not interchangeable.
(12) Install lamp (22) in socket (23).
(13) Install lens (24) and lens holder (25) on
base (6) with two screws (26).
c. Follow-On Maintenance
(1) Check service drive lights and blackout
lights operation (TM 9-2320-360-10).
(2) Remove wheel chocks.
Change 2 7-127
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
