 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(4) Disconnect spring (9) from lens retainer
(7).
(5) Slide lens retainer (7) off adjusting screws
(10) to remove from housing (11).
(6) Remove three nuts (12), lockwashers
(13), washers (14), and housing (11) from
mounts (15). Discard lockwashers.
NOTE
Tag
and
mark
wires
before
disconnecting.
(7) Disconnect three wire connectors (16)
from feedthrough connectors (17) in
housing (11).
(8) Remove four locknuts (18), screws (19),
mount (20), and shield (21) from fender
(22). Discard locknuts.
(8.1) Remove quick-edge molding (22.1) from
shield (21).
(9) Remove three nuts (23), lockwashers
(24), and mounts (15) from mount (20).
Discard lockwashers.
(10) Remove three feedthrough connec tors
(17) and grommets (25) from housing
(11).
b. Installation
NOTE
To install lamp only, do steps (8)
thru (10).
Grommets are installed on back of
housing with larger side facing
out.
(1) Install
three
grommets
(1)
and
feedthrough connectors (2) in housing (3).
Change 1 7-115
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
