2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
7-39. HEADLIGHT ADJUSTMENT/REPAIR
This task covers:
d. Follow-On Maintenance
CTI controller set in highway mode
Tags, Identification (Item 32, Appendix C)
Locknuts (4) (Item 58, Appendix G)
Air system pressurized to 120-125psi
Lockwashers (6) (Item 100, Appendix G)
Lockwashers (4) (It em 104, Appendix G)
HET Tractor parked on hard, level
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Tape, Measuring (Item 48, Appendix F)
Both headlights are replaced the
same way. Left side is shown.
To remove lamp only, do steps (1)
(1) Remove four screws (1), lockwashers (2),
and two headlight guards (3). Discard
(2) Loosen three captive screws (4) and
remove retaining ring (5) and lamp (6)
from lens retainer (7).
disconnecting. Each lamp wire has a
numbered metal tag attached.
(3) Disconnect three wire connectors (8) from
lens retainer (7).
7-114 Change 1
|Integrated Publishing, Inc.|