Installation - TM-9-2320-360-20-20275

TM 9-2320-360-20-2

b. Installation

(1)

Install two wires (1) in D and B holes in cable

plug (2).

(2)

Close cable plug (2).

(3) Position reverse light switch (3) on selector lever

assembly (4). Install two new lockwashers (5)

and screws (6).

NOTE

Plastic

cable

ties

should

positioned in locations marked

during removal.

(4) Secure wiring to reverse light switch (3) with

plastic cable ties (7).

(5) Position selector lever assembly (4) in mounting

position on doghouse (8).

(6) Connect cable plug (2) to wiring harness

connector (9).

(7) Install cover plate (10) on top of doghouse ( )

with four screws (11) and four screws (12).

c. Follow-On Maintenance

(1) Install shifter guard (para 16-2).

(2) Connect batteries (para 7-61).

(3) Turn ENGINE switch to ON position (TM

9-2320-360-10).

(4) Check operation of reverse light (TM

9-2320-360-10).

(5) Turn ENGINE switch to OFF position (TM

9-2320-360-10).

7-75