STOPLIGHT SWITCH REPLACEMENT

TM 9-2320-360-20-2

7-23. STOPLIGHT SWITCH REPLACEMENT

This task covers

a. Removal

c. Follow-On Maintenance

b. Installation

Initial Setup:

Equipment Conditions

Materials/Part s

Batteries disconnected (para 7-61).

Compound, Sealing, Pipe Thread (Item 15,

Air system drained (TM 9-2320-360-10).

Driver's side interior firewall insulation

Tags, Identification (Item 32, Appendix C)

Tools and Special Tools

Tool Kit, Genl Mech (Item 54, Appendix F)

a. Removal

NOTE

To remove upper switch only, do

steps (1), (2), and (5). To remove

lower switch only, do steps (3) thru

(5).

Tag and mark wires before removal.

(1) Remove nut (1 ), wire no. 1005 (2), and washer

(3) from terminal (4).

(2) Remove nut (5), wire no. 1009 (6), and washer

(7) from terminal (8).

(3) Remove nut (9), wire no. 1005 (10), and washer

(11) from terminal (12).

(4) Remove nut (13), wire no. 1009 (14), and

washer (15) from terminal (16).

Change 2 7-67