Disassembly - TM-9-2320-360-20-20133

TM 9-2320-360-20-2

b. Disassembly

(1) Remove two locknuts (1), screws (2), and

bracket (3) from ladder support (4). Discard

locknuts.

(2) Remove locknut (5), screw (6), and rubber hook

(7) from bracket (8). Discard locknut.

(3) Remove locknut (9), screw (10), and bracket (8)

from ladder support (4). Discard locknut.

NOTE

Do step (4) only if rubber strip is

damaged.

(4) Remove rubber strip (11) from ladder support

(4). Discard strip.

c. Assembly

WARNING

Adhesive causes immediate bonding

on contact with eyes, skin, or

clothing and also gives off harmful

vapors. Wear protective goggles and

use in well-ventilated area.

adhesive gets in eyes, try to keep

eyes open; flush eyes with water for

15 minutes and get immediate

medical attention.

NOTE

Do steps (1) and (2) only if rubber

strip was removed.

(1) Coat rubber strip (1) with adhesive.

(2) Install rubber strip (1) on ladder support (2).

(3) Install bracket (3) on ladder support (2) with

screw (4) and new locknut (5).

(4) Install rubber hook (6) on bracket (3) with screw

(7) and new locknut (8).

(5) Install bracket (9) on ladder support (2) with two

screws (10) and new locknuts (11).

5-21