Tail Pipe Installation cont'd - TM-9-2320-360-20-20128

TM 9-2320-360-20-2

5-4. TAIL PIPE ASSEMBLY REPAIR (CONT)

(14) Align bottom six holes in upper tail pipe guard

(20) with holes in tail pipe assembly support (4).

(15)

Install five screws (21) through upper tail pipe

guard (20) and tail pipe assembly support (4).

(16)

Align two holes in exhaust support brace (22)

with holes in tail pipe assembly support (4) and

upper tail pipe guard (20).

(17) Install two screws (23) through exhaust support

brace (22), upper tail pipe guard (20), and tail

pipe assembly support (4).

(18)

Install two new locknuts (24) on screws (23).

(19)

Install two screws (25) through upper tail pipe

guard (20) and tail pipe assembly support (4).

(20)

Install two new locknuts (26) on screws (25).

(21)

Align six holes in back tail pipe guard (27) with

holes in top of upper tail pipe guard (20).

(22)

Install six screws (28) through upper tail pipe

guard (20) and back tail pipe guard (27).

(23)

Install four new locknuts (29) on screws (28).

(24)

Install rain cap (30) on tail pipe (1). Tighten nut

(31) on rain cap.

(25)

Install rubber strap (32) on upper tail pipe guard

(20).

e. Follow-On Maintenance

(1)

Start engine (TM 9-2320-360-10).

(2)

Check for exhaust leaks, excessive noise, and

vibration.

(3)

Shut off engine (TM 9-2320-360-10).

(4)

Install ladder support (para 5-6).

(5)

Install exhaust heat shield (para 5-2.1).

5-16 Change 1