Quantcast Installation - TM-9-2320-360-20-20098 2320-01-318-9902 EIC:B5C, VOLUME NO. 2">

 

Click here to make tpub.com your Home Page

Page Title: Installation
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Assembly cont'd - TM-9-2320-360-20-20097
Up
TM-9-2320-360-20-2 Truck Tractor M1070 8x8 Heavy Equipment Transporter (HET) NSN
Next
SECONDARY FUEL FILTER REPLACEMENT - TM-9-2320-360-20-20099
TM 9-2320-360-20-2
e. Installation
(1) Install bracket (1) on stowage box (2) with
two screws (3) and new locknuts (4).
(2) Install hose no. 2259 (5) on elbow (6).
(3) Install hose no. 2920 (7) on elbow (8).
(4) Install hose no. 2921 (9) on elbow (10).
(5) Install hose no. 2261 (11) on elbow (12).
(6) Install hose no. 2922 (13) on elbow (14).
(7) Install seal (15) and drain valve (16) on
sediment bowl (17).
(8) Install  sediment  bowl  (17)  and  new
preformed packing (18) on new filter
element (19).
WARNING
Fuel is very flammable and can
explode easily.
To avoid serious
Injury or death, keep fuel away from
open fire and keep fire extinguisher
within easy reach when working with
fuel.  Do not work on fuel system
when engine is hot.  Fuel can be
ignited by hot engine. When working
with fuel, post signs that read:  NO
SMOKING  WITHIN  50  FEET  OF
VEHICLE.
(9) Fill filter element (19) and sediment bowl
(17) with fuel.
(10) Lubricate new gasket (20) with fuel.
Install gasket (20) on filter element (19).
(11) Screw filter element (19), gasket (20), and
sediment bowl (17) on housing (21).
Tighten 2/3 turn after gasket contacts
housing.
(12) Connect wire plug (22) to wire receptacle
(23).
(13) Install hose (24) on drain valve (16) with
clamp (25).
f. Follow-On Maintenance
(1) Prime
hand
priming
pump
(TM 9-2320-360-10).
(2) Start engine (TM 9-2320-360-10).
(3) Check for leaks.
(4) Shut off engine (TM 9-2320-360-10).
(5) Remove wheel chocks.
4-59

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.