Quantcast Assembly cont'd - TM-9-2320-360-20-20097 2320-01-318-9902 EIC:B5C, VOLUME NO. 2">

 

Click here to make tpub.com your Home Page

Page Title: Assembly cont'd
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Cleaning/Inspection - TM-9-2320-360-20-20096
Up
TM-9-2320-360-20-2 Truck Tractor M1070 8x8 Heavy Equipment Transporter (HET) NSN
Next
Installation - TM-9-2320-360-20-20098
TM 9-2320-360-20-2
4-12. FUEL WATER/SEPARATOR REPAIR (CONT)
WARNING
Pipe thread sealing compound can burn easily, can give off harmful vapors, and Is
harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use In well-ventilated area. If pipe thread sealing compound gets on skin or
clothing, wash Immediately with soap and water.
CAUTION
Use pipe thread sealing compound
sparingly only on pipe threads.  Do
not  apply  compound  to  hose
connections.  Damage to equipment
may result.
(2) Coat threads of elbow (6), reducer (7), tee
(8), and elbow (9) with pipe thread sealing
compound.
NOTE
Direction of flow is marked by arrows
on top of housing.
(3) Install tee (8) in adapter (3) on outlet side
of housing (5).
(4) Install reducer (7) on tee (8).
(5) Install elbow (6) on reducer (7).
(6) Install elbow (9) on tee (8).
(7) Coat threads of reducer (10), tee (11),
check valve (12), elbows (13, 14, and 15),
tee (16), and reducer (17) with pipe thread
sealing compound.
(8) Install tee (16) in adapter (4) on inlet side
of housing (5).
(9) Install tee (11) on tee (16).
(10) Install reducer (10) on tee (11).
(11) Install check valve (12) on reducer (10).
(12) Install elbow (13) on check valve (12).
(13) Install elbow (14) on tee (16).
(14) Install reducer (17) on tee (11).
(15) Install elbow (15) on reducer (17).
(16) Coat threads of four screws (18) with
adhesive-sealant.
(17) Install bracket (19) on housing (5) with
four screws (18).
4-58

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.