 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-5. DIFFERENTIAL (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
20
Drive gear
Cross shaft (42)
Install
Press in, with key (46) in
(40)
and key (46)
line with keyway
21
Cross shaft
a. New bearing
Install
If old bearing (47) was re-
(42)
(47)
moved. Press onto end op-
posite drive gear (40)
b. Bearing (45)
Install
Press onto drive gear (40) end
c. Bearing
Position
retainer (44)
d. Two capscrews
Install
Tighten to 130-165 pounds foot
(43)
22
Cross
New bearing cup
Install
If old bearing cup was re-
shaft
(48)
moved. Press in
bearing
cage (37)
23
Differential
a. Bearings (45
Lubricate
With light machine oil
carrier
and 47) and
housing (1)
bearing cups
(48 and 53)
b. Cross shaft
Install
Tilt to put end opposite drive
(42)
gear (40) in first
c. Shims (41)
Position
Be sure you install same shims
removed earlier. Aline all
holes
d. Cross shaft
Install
Tap with soft mallet
bearing
cage (37)
e. Six capscrews
Install
Tighten to 130-165 pounds
(38) and lock
foot
washers (39)
NOTE
Rotate cross shaft (42) several times before checking bearing preload to assure full bearing contact.
4-157
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals