 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
f. First Clutch Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
If removed earlier
6
Gear (1)
a.
Hub (2)
Install
If removed earlier
b.
Internal snap
Install
ring (3)
Be sure that splines on hub
7
Trans-
a.
Assembly con-
Install
(2) engage splines on low
mission
sisting of
sun gear in adapter housing.
gear (1),
Also be sure that thrust
hub (2), and
washer is properly posi-
internal snap
tioned on hub of adapter
ring (3)
housing
Soak discs (6) in clean trans-
b.
Six plates (7)
Install
mission fluid for at least
and six new
two minutes before install-
discs (6)
ation. Install plates (7)
and discs (6) alternately,
as shown in exploded view
Flat side first
c.
Plate (5)
Install
d.
Internal snap
Install
ring (4)
Use first clutch gage, as
8
First
Clearance between
Measure
shown. If the correct clear-
clutch
internal snap
ance of 0.074-0.147 inch is
clearance
ring (4) and
achieved, first step of gage
check
plate (5)
will fit, second step won't.
If clearance isn't correct;
remove discs (6) and plates
(7) and measure total thick-
ness. Replace any or all
plates (7) to achieve cor-
rect clearance. Thinner and
thicker plates (5) are also
available
4-77
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals