Rear Cab Panel

TM 9-2320-285-24-2

3-35. BODY AND CAB MAINTENANCE (CONT)

d. Rear Cab Panel.

This task covers:

a. Removal

c. Inspection

b. Cleaning

d. Installation

INITIAL SETUP

Tools

Personnel Required

No. 1 Common Organizational Maintenance

Automotive Repairer MOS 63H

Tool Kit

Adjustable open end wrench

Equipment Condition

Socket wrench set

Paragraph

Condition Description

Safety glasses

Vehicle parked on level

Materials/Parts

surface, engine off, and

Cleaning solvent

Item 1, Appendix C

parking brake applied.

Clean cloths

Item 2, Appendix C

2-65j

Rear window guard removed.

Caulk

3-35g

Rear window removed.

2-65m

Paper compartment removed.

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

Cab rear,

a. 18 capscrews

Remove

inside

(1) and

washers (2)

b. Rear cab panel

Remove

(3)

CLEANING

a. Rear cab panel

Clean

Remove caulk by scraping

(3) and cab

opening

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and

use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If

you become dizzy while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin

or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and obtain

medical aid immediately.

3-351