INSPECTION - TM-9-2320-285-24-20342

TM 9-2320-285-24-2

3-35. BODY AND CAB MAINTENANCE

a. Cab Mounts.

STEP

LOCATION

ITEM

ACTION

REMARKS

INSPECTION

a. Cab mounts (7)

Inspect

Replace if cracked, torn,

or deteriorated

b. Capscrews and

Inspect

Replace if cracked, broken,

locknuts

or threads damaged

INSTALLATION

Cab deck

Seven cab mounts

Position

Align cab mount holes with

weldment

(7)

holes in cab deck weldment

WARNING

When using chain hoist to remove or install parts, be sure chain hoist is securely fastened to the part and that all

slack in chain is taken up. Failure to do so could cause serious injury due to the part falling on you. If you are

injured by falling equipment, obtain medical aid immediately.

Cab, top

Cab

Lower

Raise cab, remove wood

blocks, and lower cab onto

cab mounts

Cab, front

Three capscrews (5)

Install and

Assistant positioned inside

and locknuts (6)

tighten

cab

Cab, right

Two capscrews (3)

Install and

side

and locknuts (4)

tighten

Cab tilt

Cab

Tilt 45

pump

degrees

Cab, rear

Two capscrews (1)

Install and

Have assistant positioned

and locknuts (2)

tighten

inside cab to hold cap-

screws (1)

Cab tilt

Cab

Lower

To normal operating position

pump

Cab, front

Cab grille

Install

Para 2-65h

Cab, right

Engine hood

Close and

side

latch

3-336