BODY AND CAB MAINTENANCE - TM-9-2320-285-24-20339

TM 9-2320-285-24-2

3-35. BODY AND CAB MAINTENANCE

a. Cab Mounts.

This task covers:

a. Removal

c. Inspection

b. Cleaning

d. Installation

INITIAL SETUP

Tools

Personnel Required

No. 1 Common Organizational Maintenance

Two Automotive Repairers MOS 63H

Tool Kit

Adjustable open end wrench

Equipment Condition

Socket wrench set

Paragraph

Condition Description

Safety glasses

Vehicle parked on level

Materials/Parts

surface, engine off, and

Cleaning solvent

Item 1, Appendix C

parking brake applied.

Clean cloths

Item 2, Appendix C

2-65h

Cab grille removed.

Detergent

Item 27, Appendix C

Engine hood open.

Four wood blocks,

Cab tilted 45 degrees.

2 by 4 by 5 inches

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

Cab, rear

Two capscrews (1)

Remove

Have assistant positioned

and locknuts (2)

inside cab to remove

capscrews (1)

Cab tilt

Cab

Lower

To normal operating position

pump

Cab, right

Two capscrews (3)

Remove

From engine hood posts

side

and locknuts (4)

Cab, front

Three capscrews

Remove

(5) and lock-

nuts (6)

WARNING

When using chain hoist to remove or install parts, be sure chain hoist is securely fastened to the part and that all

slack in chain is taken up. Failure to do so could cause serious injury due to the part falling on you. If you are

injured by falling equipment, obtain medical aid immediately.

3-333