 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28.
STEERING SYSTEM MAINTENANCE (CONT)
f. Power Steering Pump (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
2
l.
Ten vanes (24)
Remove
(cont)
m
0-rings
Remove and
(25 and 26)
discard
3
Body (34)
a
Body (34)
Invert
Remove body from vise. Invert
so that retaining ring (27)
is facing up. Reclamp in
vise
b
Retaining ring
Remove
Use retaining ring pliers
(27)
c
Shaft (28)
Remove
Use bronze bar and mallet to
tap out
d
Bearing (30)
Remove
Use puller
e
Shaft seal (31)
Remove and
discard
f
Retaining ring
Remove
Use retaining ring pliers
(32)
g
Bearing (33)
Remove
Use puller
h
Body (34)
Remove
From vise
4
Cover (18)
a
Cover (18)
Clamp
In soft jawed vise
b
Pin (35)
Remove
Use pin punch and hammer to
drive out
c
Plug (36) and
Remove
Discard 0-ring
0-ring (37)
d
Control valve
Remove
(38)
e
Spring (39)
Remove
CLEANING
WARNING
Dry cleaning solvent (PD680), used to clean parts is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes .and don't breathe
vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact
with eyes is made, wash eyes with water and obtain medical aid immediately.
3-287
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals