 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28.
STEERING SYSTEM MAINTENANCE (CONT)
e. Steering Linkage and Ball Sockets (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
9
Front axle,
a
Link (24)
Adjust
Adjust overall length of link
steering
until body (4) lubrication
gear
fitting opening is centered
on ball stud of pitman arm.
Be sure bend in link is at
center of tractor. Also be
sure same amount of link
thread is engaged by each
ball socket assembly
b
Rubber boot (5)
Install
On pitman arm ball stud
c
Ball seat (7)
a
Lubricate Use grease
b
Install
In body (4), flat side
facing link (24)
d
Pitman arm
Move
Move pitman arm forward just
enough to allow installa-
tion of body (4)
e
Body (4)
Install
On pitman arm ball stud
f
Ball seat (6)
a
Lubricate
Use grease
b
Install
In body (4), concave side
facing link (24)
g
Spring (3) and
Install and
Tighten plug (2), then back
plug (2)
tighten
off until slot aligns with
body (4) cotter pin hole
h
New cotter pin
Install and
(1)
spread
i
Capscrew (9),
Install and
On clamp (12)
lock washer
tighten
(10), and
nut (11)
j
Lubrication
Install
In body (4)
fitting (8)
k
Rubber boot (5)
Secure
Wrap around ball socket
assembly and bend tabs to
secure
l
Lubrication
Lubricate
Use grease gun and grease
fitting (8)
10
Front axle,
a
Capscrew (20)
Tighten
steering
and nut (22)
arm
b
Rubber boot (20) Secure
Wrap around ball socket
assembly and bend tabs to
secure
c
Lubrication
a
Install
In plug (14)
fitting (23)
b
Lubricate
Use grease gun and grease
3-282
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals