TOO MUCH PLAY IN STEERING WHEEL

TM 9-2320-285-24-2

3-27.

STEERING SYSTEM TROUBLESHOOTING (CONT)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

2. TOO MUCH PLAY IN STEERING WHEEL

Step 1. Check that power steering gear sector shaft is properly adjusted (does not have lash).

a. If sector shaft is not properly adjusted, adjust (para 3-28d).

b. If sector shaft is properly adjusted, proceed to step 2 below.

Step 2. Remove universal joint (para 3-28b).

Check universal joint components for wear or damage.

a. If universal joint components are worn or damaged, replace components (para 3-28b).

b. If components are not worn or damaged, proceed to step 3 below.

Step 3. Remove and disassemble power steering gear (para 3-28d). Check for damage to sector shaft gear and rack

piston teeth.

a. If gear or teeth are damaged, replace (para 3-28d).

b. If gear and teeth are not damaged, overhaul power steering gear (para 3-28d).

3. TRACTOR WANDERS OVER ROAD

Step 1. Remove universal joint (para 3-28b).

Check universal joint components for wear or damage.

a. If universal joint components are worn or damaged, replace components (para 3-28b).

b. If components are not worn or damaged, proceed to step 2 below.

Step 2. Check if power steering gear mounting capscrews are loose.

a. If power steering gear mounting capscrews are loose, tighten (para 3-28d).

b. If power steering gear mounting capscrews are tight, proceed to step 3 below.

3-227