REASSEMBLY (cont) - TM-9-2320-285-24-10871

TM 9-2320-285-24-1

2-73. HEATERS MAINTENANCE (CONT)

Coolant Heater and Pump (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REASSEMBLY (cont)

b. Three new wire

a. Install

Crimp connectors onto twisted

(cont)

connectors

wire ends

(65)

b. Tape

Wrap at least three turns of

new electrical tape around

each wire connector and its

leads

Plastic tubing

a. Install

Pull open at slits and

(44, 63, and

install over 3-wire cords

64)

(45, 55, and 66)

b. Tape

Wrap new electrical tape

around plastic tubing at

locations noted during

removal

INSTALLATION

Front

3-wire cord (7)

Install, if

Para 2-73f

bumper

and plastic

removed

tubing (67)

Front

a. Heater support

Position

As an assembly

engine

bracket (12)

mount

with heater,

pump, hoses,

and wires

b. Two capscrews

Install and

(11) and

tighten

locknuts (10)

WARNING

Be sure you twist together the same color wire ends in the following step.

Connect green-to-green and black-to-black. Incorrect connections or

exposed conductors can cause the engine and body of the tractor to be

energized at 110 Vac. Serious injury or death can result from contact

with 110 Vac power.

3-wire cords

Connect

As tagged; twist wire ends

(6 and 7)

(green to green, black to

black, black to black)

2-848