REMOVAL (cont) - TM-9-2320-285-24-10646

TM 9-2320-285-24-1

2-52. AIR COMPRESSOR ASSEMBLY MAINTENANCE (CONT)

e. Air Compressor Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

c. Capscrew (27),

Remove

(cont)

lock washer

(28), and

compressor

support (29)

d. Shims (30)

Remove

Note location and number of

shims removed

Compressor

a. Compressor (21)

Support

In vise

(21)

b. Cotter pin (31)

Remove

c. Nut (32)

Remove

d. Pulley (33)

Remove

Use pulley puller

e. Key (34)

Remove

f. Two capscrews

Remove

If necessary to remove

(35) and lock

manifold (37)

washers (36)

g. Manifold (37)

Remove

If necessary for replacement;

and gasket

discard gasket

(38)

CLEANING

a. Hoses (4, 6,

Clean

Wipe with clean cloth moist-

and 9)

ened with clean diesel fuel

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to

do so could cause seri- ous injury. If you become dizzy while using cleaning solvent, get fresh air and

medical attention immediate- ly. If contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possi- ble blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

2-623