 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-44.
REAR AXLE MAINTENANCE (CONT)
b.
Axle Shafts, Hubs, and Drums (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY/INSTALLATION (cont)
8
c. Inner nut (8)
a. Install
With locking dowel positioned
(cont)
outward
b. Tighten
To 100 pounds foot; then back
nut off, tighten to 50
pounds foot, and back nut
off 1/6 turn
d. Locking washer
Position
Against inner nut (8)
(7)
e. Outer nut (6)
Install and
To 250-400 pounds foot
tighten
f. New gasket (5)
Position
Over studs (18)
NOTE
Right and left axle shafts (4) are not interchangeable. Observe mark made during removal
and install proper axle shaft in following step.
g. Axle shaft (4)
Install
h. Eight tapered
Install and
Tighten nuts (1) to 130-165
sleeves (3),
tighten
pounds foot
lock washers
(2), and nuts
(1)
NOTE
Repeat steps 6 thru 8 above to reassemble and install right hand axle shaft, hub, and drum.
9
Rear axle
Rear wheels and
Install
ends
tires
10
Tractor
a. Rear frame
Raise
Use jack
frame,
b. Jack stands
Remove
From under tractor frame
rear
c. Rear tires
Lower
To ground; then remove jack
11
Rear axle
a. Lubricant
Install
fill, raise each side of
rear axle with jack several
inches to allow lubricant
to fill each hub. Then re-
check rear axle oil level.)
b. Parking brakes
Uncage
2-517
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals