 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
g.
Gear Shift Control (cont).
(1) Gear Shift Control Lever and Cable (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENT (cont)
NOTE
When linkage is correctly adjusted, trunnion (2) and pivot (26) can be
moved freely in each range. If adjustment is necessary, proceed as
follows.
b. Position
Place shift lever in neutral
(N) position
19
Transmis-
a. Cotter pin (1)
Remove
sion, left
b. Trunnion (2)
Disengage
From selector lever (6)
hand side
c. Selector lever
Position
Place in neutral (N) position
(6)
d. Nut (4)
Loosen
e. Trunnion (2)
Adjust
Turn on end of cable (27) un-
til trunnion freely aligns
with hole in selector lever
f.
Cotter pin (1)
Install
Do not spread
NOTE
Repeat step 19 above, checking freedom of movement of trunnion (2) for
all gear shift ranges. When trunnion (2) enters hole in selector lever (6)
freely in each position, proceed as follows.
g. Nut (4)
Tighten
h. Cotter pin (1)
Spread
20
Cab
Tractor Road test
Road test tractor to be sure
interior
that shift lever functions
properly, that indicator
band indicates proper gear
range, and that gear range
selected is correct
21
Tractor
Rear platform
Install
frame
2-462
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals