VEHICLE CREEPS IN NEUTRAL

TM 9-2320-285-24-1

2-37. TRANSMISSION TROUBLESHOOTING (CONT)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

8. VEHICLE CREEPS IN NEUTRAL

Check selector linkage to see if it is out of adjustment.

a. If linkage is out of adjustment, adjust (para 2-41g).

b. If linkage is okay, notify direct support maintenance.

9. TRANSMISSION IN WRONG GEAR ACCORDING TO POSITION STRIP

Check selector linkage to see if it is out of adjustment.

a. If linkage is out of adjustment, adjust (para 2-41g).

b. If linkage is not out of adjustment, notify direct support maintenance.

10. NO RESPONSE TO SHIFT LEVER MOVEMENT

Step 1.

Check to see if selector linkage is disconnected.

a. If linkage is disconnected, connect and adjust (para 2-41g).

b. If linkage is not disconnected, go to step 2 below.

Step 2.

Check to see if selector linkage is damaged or broken.

a. If selector linkage is damaged or broken, repair or replace (para 2-41g).

b. If linkage is okay, notify direct support maintenance.

11. SLOW OR ERRATIC SHIFTING

Step 1.

Remove vent assembly (para 2-41f) and check if dirty or damaged.

a. If vent assembly is dirty, clean; if damaged, replace (para 2-41f).

b. If vent assembly is not dirty or damaged, go to step 2 below.

Step 2.

Check transmission linkage for proper adjustment or damage.

a. If linkage is not properly adjusted, adjust (para 2-41g); replace any damaged parts (para 2-41g).

b. If linkage is okay, notify direct support maintenance.

2-425