REMOVAL (cont) - TM-9-2320-285-24-10379

TM 9-2320-285-24-1

2-32.

SENDING UNITS AND SWITCHES MAINTENANCE (CONT)

e. Neutral Start and Backup Light Switches (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

g. Four electrical

Tag and dis-

Pull electrical connectors

(cont)

leads (9 thru

connect

(13) with leads from con-

12)

nector housing (1)

h. Four electrical

Remove and

Only if inspection indicates

connectors

discard

need for replacement. Cut

(13)

lead as close to connector

as possible

CLEANING

a. Electrical

Clean

Wipe with clean, dry cloth

leads (9 thru

12), backup

light switch

(4), neutral

start switch

(7), and

connector

housing (1)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact

with eyes is made, wash eyes with water and seek medical aid immediately. Compressed air must not

exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do so could cause

serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into your

eyes, seek medical attention immediately.

b. All other parts

Clean

Use cleaning solvent P-D-680;

dry with compressed air or

clean cloths

2-356