REMOVAL - TM-9-2320-285-24-10243

TM 9-2320-285-24-1

2-26. INSTRUMENT PANEL MAINTENANCE (CONT)

a. Switches (cont).

(2) Quick Start Switch (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

NOTE

Tag and identify all electrical leads before discon-

nection and removal.

Instrument

a. Two electrical

Tag

panel

leads (2 and

b. Two screws (1)

Remove

c. Two electrical

Disconnect

leads (2 and

d. Rubber boot (4)

Remove

From nut (5)

e. Nut (5)

Remove

Support switch (6)

f. Switch (6)

Remove

From instrument panel

CLEANING

a. Electrical leads Clean

Wipe with clean, dry cloth

(2 and 3),

switch (6),

and rubber

boot (4)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause seri- ous injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediate- ly. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

2-220