CLEANING (cont) - TM-9-2320-285-24-10240

TM 9-2320-285-24-1

2-26. INSTRUMENT PANEL MAINTENANCE (CONT)

a. Switches (cont)

(1) Ignition Switch (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING (cont)

WARNING

(cont)

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

b. All other parts

Clean

Wipe with clean cloth moist-

ened with cleaning solvent

P-D-680; allow to air dry

INSPECTION

All parts

Inspect

Replace if cracked, broken,

insulation frayed, or

threads damaged

INSTALLATION

Instrument

a. Nut (12)

Install

On ignition switch (11)

panel

b. Tumbler (13)

Install

If removed. Depress tumbler

(13) lock to install

c. Ignition switch

Position

In instrument panel, with

(11)

key removed

d. Nut (10)

Install and

tighten

e. Electrical

Connect

To BAT terminal of ignition

leads

switch (11)

(3 and 4)

f. One nut (1) and

Install and

Secures leads (3 and 4)

lock washer

tighten

(2)

g. Electrical

Connect

To IGN terminal of ignition

leads

switch (11)

(6 and 7)

2-217