CLEANING - TM-9-2320-285-24-10220

TM 9-2320-285-24-1

2-24.

ALTERNATOR MAINTENANCE (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

a. Two belts (3)

Clean

Wipe with clean cloth moist-

ened with detergent

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when

drying parts with compressed air. Failure to do so could cause serious

injury to eyes and possible blindness. If you hurt your eyes or if a foreign

object is blown into your eyes, seek medical attention immediately.

b. Alternator (11)

Clean

Wipe with clean cloth moist-

ened with cleaning solvent

P-D-680; dry with clean

cloths

Pulleys (14 and

Clean

Use cleaning solvent P-D-680

28)

and stiff bristled brush;

dry with compressed air

d. All other parts

Clean

Use cleaning solvent P-D-680;

dry with compressed air

INSPECTION

a. Two belts (3)

Inspect

Replace as a set if cracked,

worn, broken, frayed, or

deteriorated

b. Alternator (11)

Inspect

Inspect for broken terminals,

bent shaft, or other external

damage. Repair alternator

if necessary (notify

direct support maintenance)

2-197