REMOVAL (cont) - TM-9-2320-285-24-10163

TM 9-2320-285-24-1

2-15.

COOLING SYSTEM MAINTENANCE (CONT)

Coolant Filter (cont).

(2)

Removal (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

g. Clamps (2, 6,

Remove from

(cont)

10, and 12)

hoses

h. Three tie

Cut, remove

Note locations for installa-

straps (17

and discard

tion

and 19)

i. Protective hose

Remove

From hoses (3 and 7)

(18)

j. Two locknuts

Remove

(14), cap-

screws (15),

and filter

head (16)

k. Hoses (3 and 7)

Remove

From tractor

CLEANING

a. Hoses (3 and 7)

Clean

Use clean cloth moistened

with mild detergent

solution

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you become dizzy while

using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or

clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes

with water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with

compressed air. Failure to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes, seek medical attention

immediately.

2-140