 |
|||
|
|
|||
|
Page Title:
Fuel Filters (cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-13.
FUEL SYSTEM MAINTENANCE (CONT)
c. Fuel Filters (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
SERVICING (cont)
1
c. Check
Start engine, run for several
(cont)
minutes, and inspect for
leaks at filters. Then stop
engine
REMOVAL
2
Primary
a. Primary filter
Remove
Use filter wrench; turn
filter
element (1)
counterclockwise to remove
head (7)
b. Filter head (7)
Loosen, dis-
lines
connect,
and remove
c. Plugs (3 and 4)
Remove
d. Two capscrews
Remove
Support filter head (7)
(5) and lock-
nuts (6)
e. Primary filter
Remove
head (7)
3
Secondary
a. Secondary filter
Remove
Use filter wrench; turn
filter
element (2)
counterclockwise to remove
head (12)
b. Filter head
Loosen, dis-
(12) lines
connect,
and remove
c. Plugs (8 and 9)
Remove
d. Two capscrews
Remove
Support filter head (12)
(10) and
locknuts (11)
e. Secondary filter Remove
head (12)
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe
vapors. Do not-use near open flame or excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact
with eyes is made wash eyes with water and seek medical aid immediately.
2-94
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals