 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-12. ENGINE MAINTENANCE (CONT)
d. External Oil Filter and Lines (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
17
a. Housing (20)
Inspect for:
Replace if defects observed
dents
cracks
splits
damaged
ports
b. Hoses (31 and
Inspect for:
Replace if defects observed.
34)
cracks
Refer to steps 18 thru 22
splits
below
wear
c.
Hold down pin
Inspect for:
Replace if defects observed
(10)
cracks
bent
condition
d. Springs (12
Inspect for:
Replace if defects observed
and 50)
damage
permanent
set
cracks
e. Remaining parts
Inspect for:
Replace if defects observed.
cracks
Refer to steps 18 thru 22
distortion
below for replacement of
damaged
connectors (29, 30, and 32)
threads
and elbow (33)
REPAIR
CAUTION
If connectors (29, 30, and/or 32) and/or elbow (33) require replacement,
discard hose (31 or 34). If hose is reused, oil leakage could occur
causing damage to engine.
18
Hose (31)
a. Connector (29
Place connector socket in vise as shown
or 30)
b. Mandrel assem-
Install in connector nipple; tighten nut of
bly tool
connector. Turn tool counterclockwise to
remove connector nipple and nut
c.
Hose (31)
Turn hose (31) clockwise out of connector
(29 or 30) socket; discard hose
2-51
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals