Click here to make tpub.com your Home Page

Page Title: SERVICE UPON RECEIPT OF MATERIEL (CONT)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-285-24-1
2-1.
SERVICE UPON RECEIPT OF MATERIEL (CONT)
e.
Deprocessing Unpacked Equipment.
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves
and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use
near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If you
become dizzy while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or clothes
is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and seek medical aid
immediately.
(1)  Removal of Protective Compounds. Remove preservative compounds from metal surfaces with cleaning
solvent P-D-680. Check and ensure that all fill openings are clear.
(2)
Cleaning. Clean all dust and dirt from seat, instrument panel, wiring, engine, and radiator.
(3)
Lubrication. Lubricate the vehicle in accordance with LO 9-2320-285-12.
2-2.
PRELIMINARY SERVICING OF EQUIPMENT
a.
Check engine oil level dipstick. Fill to FULL mark if level is low.
b.
Check that fuel gage indicates sufficient fuel. Add fuel if level is low.
c.
Check that coolant level is approximately 2 to 4 inches below top of coolant reservoir filler neck. Fill as necessary
if level is low.
d.
Check that battery electrolyte level is above plates in all batteries. Add distilled water if level is low.
e.
Check transmission fluid level dipstick. Fill to FULL mark if level is low.
f.
Check that hydraulic oil level is at hydraulic reservoir screen. Add hydraulic oil if level is low.
g.
Perform before operation PMCS (refer to separate Operator's Manual, TM 9-2320-285-10).
2-4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business