 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
AIR HORN AIR LINES
This task covers:
c. Installation (page 4-1262)
a. Removal (page 4-1260)
b. Repair (page 4-1262)
INITIAL SETUP
Materials/Parts Continued
Tools
Soap, liquid (item 14, appendix C)
Hammer, plastic
Tag marking (item 18, appendix C)
Knife, pocket
Tubing, nylon air brake, 1/4-inch OD
Pliers, diagonal-cutting
(as required)
Pliers, long-nose, round
Wrap, tie (item 24, appendix C)
Pliers, slip-joint, straight-nose
Wrench, open-end, 9/16-inch
Personnel Required
One
Materials/Parts
Sleeve, compression, tube, 1/4-inch
inside diameter (two required)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
WARNING
Make sure ail pressure is drained from air system before disconnecting air lines. Parts
under pressure can, when removed, fly off with great force causing injury to personnel.
NOTE
Tag lines according to general maintenance instructions (page 4-1).
Drain (TM 9-2320-270-10).
Air system
1.
Using 9/16-inch wrench, unscrew and pull
Air line 39 (2)
2. Elbow (1)
out.
Using long-nose pliers, pull out.
insert (3)
3. Air line 39 (2)
or elbow (1)
4-1260
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals