 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-270-20-3
HYDRAULIC RESERVOIR -CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a.
Using two adjustable wrenches,
Hose (2)
Nipple (1)
1.
unscrew and take off.
b.
Plug.
Repeat step 1 for other hose.
Using 1/2-inch wrench, unscrew and
a.
Four nuts (5),
Two U-bolts (3)
2.
take off.
washers (6) and
and (4)
b.
Get rid of Iockwashers (7).
Iockwashers (7)
Take off.
Two U-bolts (3)
Two U-bolt brackets
3.
Repeat steps 2 and 3 for other
and (4)
(8) and (9)
U-bolts.
Using pipe wrench, unscrew and take off.
Pipe(n)
Elbow (1 O)
4.
Repeat step 4 for other pipe.
a. Using pliers, take off.
Tie wraps (12)
Pipe(n)
5.
b. Get rid of.
Move out of way.
Pipe(n)
U-bolt bracket (9)
6.
Repeat steps 5 and 6 for other pipe.
Using 9/16-inch wrench, unscrew and take
Hose (14)
Elbow (13)
7.
off.
Using 5/8-inch and 1 1/16-inch open-end
Elbow (13)
Reducer bushing (15)
8.
wrenches, unscrew and take off.
Using 1 1/16-inch open-end wrench and
Reducer bushing (15)
Tee pipe (16)
9.
pipe wrench, unscrew and take off.
Using pipe wrench, unscrew and take off.
Tee pipe (16)
Reservoir (17)
10.
NOTE
Do not remove nipple unless it is damaged and needs replacement.
If nipple stays in tee pipe and must be removed, do step 11. If nipple stays in reservoir
and must be removed, do step 12.
a. Secure tee pipe (16) in vise.
Nipple (18)
11. Tee pipe (16)
b. Using pipe wrench, unscrew and take
out.
c. Get rid of.
d. Take tee pipe (16) out of vise.
4-1164
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals