 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
DRIVER'S SEAT AND SUPPORT - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
a. Using 1/2-inch wrench, unscrew and
Four nuts (3),
1. Seat (1) to
take out.
Iockwashers (4),
support (2)
and washers (5)
b. Get rid of Iockwashers (4).
Take off.
Seat (1) and two
2. support (2)
spacers (6)
Using 7/16-inch socket, handle, and
Four screws (8),
a.
3. Brace (7) to
7/16-inch wrench, unscrew and take
washers (9), lock-
support (2)
out.
washers (10), and
b.
Get rid of Iockwashers (10).
nuts (11)
Using 1/2-inch socket, handle, and
a.
Screw (13),
4. support (2) to
1/2-inch wrench, unscrew and take out.
washer (14), two
cab floor (12)
Get rid of Iockwashers(15).
Iockwashers (1 5),
b.
jumper (16), and
nut (17)
Using 1/2-inch socket, handle, and
Screw (18),
a.
5.
1/2-inch wrench, unscrew and take out.
washer (19), two
Get rid of Iockwashers (20).
Iockwashers (20),
b.
and nut (21)
With help from assistant and using
Two screws (22),
a.
6.
1/2-inch socket, handle, and 1/2-inch
washers (23), lock-
wrench, unscrew and take out.
washers (24), and
b. Get rid of Iockwashers (24).
nuts (25)
Take off.
support (2)
7. Cab floor (12)
CLEANING/inspection
All parts
Clean and inspect as shown in the general
8.
maintenance instructions (page 4-1).
INSTALLATION
Place in position.
support (2)
9. Cab floor (12)
Two screws (22),
With help from assistant, screw in and
10. support (2) to
washers (23), new
tighten using 1/2-inch socket, handle,
cab floor (12)
Iockwashers (24),
and 1/2-inch wrench.
and nuts (25)
4-1128
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals