RIGHT AIR PILOT VALVE

TM 9-2320-270-20-3

RIGHT AIR PILOT VALVE

This task covers:

c. Inspection/Replacement (page 4-1072)

a. Removal (page 4-1070)

b. Installation (page 4-1072)

b. Cleaning (page 4-1072)

INITIAL SETUP

Materials/Parts

Tools

Lockwashers (two required)

Hammer, plastic

Tag, marking (item 18, appendix C)

Handle, ratchet, 3/8-inch drive

Tape, teflon (item 22, appendix C)

Pliers, diagonal-cutting

Wrap, tie (item 24, appendix C)

Pliers, long-nose, round

Pliers, slip-joint, straight-nose

Personnel Required

Socket, 3/8-inch drive, 7/16-inch

Vise, machinist's

One

Wrench, open-end, 7/16-inch

Wrench, open-end, 5/8-inch

Equipment Condition

Air system drained (TM 9-2320-270-10).

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

Tag lines according to general maintenance instructions (page 4-1).

a. Using diagonal-cutting pliers, cut and

Two tie wraps (2)

1. Hose harness (1)

take off.

b. Get rid of.

Using 5/8-inch wrench, unscrew and

Hose (4)

2. Elbow (3)

take off.

Using long-nose pliers, pull out.

insert (5)

4-1070