INSTALLATION - TM-9-2320-270-20-30122

TM 9-2320-270-20-3

TOWING PINTLE - CONTINUED

ACTION

ITEM

REMARKS

LOCATION

INSTALLATION

CAUTION

Do not wedge wrench against lights to hold bolts. Have assistant hold wrench. Putting

pressure on taillight or blackout Iight can break It.

Inner bracket (2)

Place in position.

26. Frame (1)

and outer bracket (3)

Screw in and tighten using 1 1/8-inch

Two nuts (4) and

27. Inner bracket (2)

socket, 10-inch extension, 1/2-inch

two screws (5)

and outer

drive handle, and 1 1/8 -Inch wrench.

bracket (3)

Pintle (6)

Put in.

28. Outer bracket (3)

NOTE

Have assistant use pry bar to keep pintle from turning while tightening slotted nut. Pintle

lock must be closed and latched.

Two washers (7)

Put on.

29. Pintle (6)

Slotted nut (8)

a. Put on.

30.

b. Using 2 1/4-inch socket, 10-inch

extension, l-inch drive handle, and pry

bar, tighten.

c. Back off just enough so pintIe turns

freely.

Cotter pin (9)

Using pliers, put in.

31. Slotted nut (8)

Three grease

Using grease gun, lubricate

32. Pintle (6) and

(LO 9-2320-270-12).

fittings (10)

outer bracket (3)

4-1050