ASSEMBLY - TM-9-2320-270-20-30121

TM 9-2320-270-20-3

TOWING PINTLE - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

20. Pintle hook (4) to

Screw (5) and

a. Screw together and tighten using 1 1/2-

pintle lock (3)

slotted nut (1)

inch socket, l-inch drive handle, and

1 1/2-inch open-end wrench.

b. Take pintle hook (4) out of vise.

21. Slotted nut (1)

New cotter pin (2)

a. Put in.

b. Use pliers to bend ends of cotter

pin (2).

22. Pintle lock (3)

Two grease

Screw in and using 5/16-inch socket and

fittings(n)

and latch pin (7)

1/4-inch drive handle, tighten.

NOTE

If chain and drive-pin were not removed, go to step 24.

Chain (12) and drive

23. Pintle hook (4)

a. Put on.

screw (13)

b. Using hammer, drive in.

24. Chain (12)

S-link (14)

Put on and using pliers, close.

New cotter pin (15)

25. S-link (14)

a. Put on and using pliers, close.

b. Put cotter pin (15) in hook (4).

TA240655

4-1049