ALINEMENT - CONTINUED - TM-9-2320-270-20-30112

TM 9-2320-270-20-3

STEERING ALINEMENT - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

ALINEMENT - CONTINUED

WARNING

Do not get between wheels and fender, or between other moving and stationary parts,

while assistant is turning wheels. There is no clearance for personnel in these areas

when turning vehicle.

Hearing protection must be worn while working under truck with engine running to pre-

vent possible ear injury.

a. Place 1/16-inch thickness gage be-

Left front stopscrew

26. Left end of front

tween axle ball (3) and stopscrew (2).

(2) and left axle

axle (1)

b. Have assistant slowly turn steering

ball (3)

wheel to the right until stopscrew (2)

is stopped by thickness gage.

c. Have assistant hold steering in this

position.

Using two 3/4-inch wrenches, hold outer

Rear stopscrew (5)

27. Pitman arm stop

nut (6) and screw stopscrew (5) firmly

bracket (4)

against pitman arm (7).

Using two 3/4-inch wrenches, tighten

Locknut (8)

28. Rear stopscrew (5)

locknut (8).

Have assistant turn straight ahead.

Steering wheel

29.

Shut down (TM 9-2320-270-10).

Engine

30.

4-1040