 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-270-20-3
TIE ROD - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION CONTINUED
Using 15/16-inch socket and handle
a.
Two nuts (5)
22. Tie rod ends (1 and
with 3/4-inch drive, tighten.
2) to steering arms
b. Using 15/16-inch socket and torque
(3 and 4)
wrench with 3/4-inch drive, tighten to
160 to 180 foot pounds (223.7 to
244.1 Nm).
c. Check to see if hole lines up with
slots.
d. If holes do not line in, tighten just
enough to line up.
Using pliers, put in.
Two new cotter
23.
pins (6)
ALINEMENT
Lubricate (LO 9-2320-270-20).
Tie rod
24.
Check air pressure of all tires
Tires
25.
(TM 9-2320-270-10).
Using wheel alinement gage, check front
Front wheels (7)
26.
wheel toe-in.
Toe-in should be 1/8-inch (3.17
millimeter). If toe-in is correct,
continue at step 30.
NOTE
If tie rod has just been installed, skip steps 27 and 28.
Using 15/16 box wrench, 15/16-inch
Four clamp screws
27. Tie rod ends
socket, and handle with 1/2-inch drive,
(9) and nuts (10)
(1 and 2)
unscrew part way.
to tie rod (8)
Using ball-peen hammer and cold chisel,
Tie rod ends (1)
28.
spread clamp end of tie rod ends enough to
and (2)
turn tie rod (8).
4-972
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals