QUICK RELEASE VALVE

TM9-2320-270-20-2

QUICK RELEASE VALVE

This task covers:

d. Inspection/Replacement (page 4-814)

a. Removal (page 4-812)

e. Assembly (page 4-814)

b. Disassembly (page 4-814)

f. Installation (page 4-815)

c. Cleaning (page 4-814)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, quick release valve to frame (two

Extension, 6-inch, 1/2-inch drive

required)

Hammer, plastic

Soap, liquid (item 14, appendix C)

Handle, ratchet, 3/8-inch drive

Tag, marking (item 18, appendix C)

Pliers, long-nose, round

Tape, teflon (item 22, appendix C)

Socket, 1/2-inch, 3/8-inch drive

Vise

Personnel Required

Wrench, box, 1/2-inch

Wrench, open-end, 9/16-inch

One

Wrench, open-end, 5/8-inch

Wrench, open-end, 3/4-inch

Wrench, open-end, 13/16-inch

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

Tag air lines according to general maintenance instructions (page 4-1).

Drain (TM 9-2320-270-10).

Air system

Using 13/16-inch wrench, unscrew and pull

Nut (3)

2. Air line 488 (1)

back.

to elbow (2)

Pull out.

Air line 488 (1)

3. Elbow (2)

Using long-nose pliers, pull out.

Insert (4)

4. Air line 488 (1)

or elbow (2)

4-812