 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-270-20-2
REAR AXLE SLACK ADJUSTER ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
lNSPECTION/REPLACEMENT
NOTE
Replace defective parts as needed.
a. Inspect for worn out clevis pin
Slack adjuster (1)
9.
bushing (2).
Bushing is worn out if it is near-
iy worn to slack adjuster casting.
b. Inspect for worn or battered splines.
c. Look for stripped threads on adjusting
screw (3).
Inspect for worn or battered splines.
Camshaft (4)
10.
Inspect for deep grooves worn in clevis
Clevis pin (5)
11.
pin (5).
Inspect for holes worn oval.
Clevis (6)
12.
INSTALLATION
Put on.
Inner washer (7)
13. Camshaft (4)
Aline splines and put on.
Slack adjuster (1)
14.
Put on same thickness and order as
Shims (8) and (9)
15.
removed.
a. Put in groove.
Snapring (10)
16. Slack adjuster (1)
b. Using punch and hammer, drive in.
to camshaft (4)
Using socket and handle, screw clockwise
Adjusting screw (3)
17. Slack adjuster (1)
until lower hole in slack adjuster (1)
alines with holes in clevis (6).
a. Grease lightly.
Clevis pin (5)
18. Clevis (6) to slack
b. Put in.
adjuster (1)
Using pliers, put in.
New cotter pin (11)
19. Clevis pin (5)
4-626
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals