REMOVAL - TM-9-2320-270-20-20099

TM 9-2320-270-20-2

PUSHER AXLE BRAKESHOES - CONTINUED

ACTION

ITEM

REMARKS

LOCATION

WARNING

Parts of brake assembly will be coated with asbestos dust. Breathing this dust maybe

hazardous to your health. Use a filter mask approved for use against asbestos dust.

Never use compressed air or dry brush to clean these assemblies. Dust shall be

removed using an industrial type vacuum cleaner equipped with a high efficiency filter

system. Clean dirt or mud from brake assemblies with a bristle brush or cloth, and

water.

NOTE

There are two sets of pusher axle brakeshoes. This task can be used to replace either set

of brakeshoes. Left side is shown.

REMOVAL

1. Two brakeshoes (1)

Two brakeshoe

Using brake repair pliers, take off.

return springs (2)

Take off.

2. Two support

Two brakeshoes (1)

brackets (3)

CLEANING/INSPECTION

Clean and inspect as shown in the generaI

All parts

maintenance instructions (page 4-1).

TA240406

4-617