HORNS AND RELAY
This task covers:
a. Removal (page 4-438)
b. Installation (page 4-441)
Extension, 12-inch, 3/8-inch drive
Handle, ratchet, 3/8-inch drive
Screwdriver, fiat-tip, 1/4-inch
Socket, 3/8-inch, 3/8-inch drive
Battery ground cable disconnected
Right side of hood opened
Lockwasher, horn to firewall
Lockwasher, relay to firewall
Tag, marking (item 18, appendix C)
Make sure battery ground cable is disconnected to prevent damage to electrical system.
Tag wires according to general maintenance instructions (page 4-1).
Wire 168 (2)
1. Right horn (1)
GND wire (3)
Screw (5) and
a. Using socket, handle, and extension,
3. Right horn (1)
unscrew and take out.
to firewall (4)
b. Get rid of lockwasher (6).
4. Firewall (4)
Right horn (1)