OIL PRESSURE SENDING UNIT AND LOW OIL PRESSURE SWITCH

TM 9-2320-270-20-1

FUEL GAGE SENDING UNIT - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE: Check operation (TM 9-2320-270-10).

TASK ENDS HERE

OIL PRESSURE SENDING UNIT AND LOW OIL PRESSURE SWITCH

This task covers:

c. Inspection (page 4-396)

d. Installation (page 4-396)

lNITIAL SETUP

Personnel Required

Tools

One

Vise

Wrench,

adjustable

Equipment Condition

Wrench,

open-end, 3/8-inch

Wrench,

open-end, 5/8-inch

Left hood open and left hood side panel

Wrench,

open-end, 1 1/16-inch

removed (TM 9-2320-270-1 O).

Wrench,

pipe, 1/4 1 inch

Materials/Parts

Lockwasher, sending unit terminal nut

to terminal

Rags, wiping (item 10, appendix C)

Solvent, cleaning (item 16, appendix C)

Tag, marking (item 18, appendix C)

Tape, teflon (item 22, appendix C)

ACTION

REMARKS

ITEM

LOCATiON

REMOVAL

NOTE

If you only need to replace the oil gage sending unit, only do steps 1 thru 3 and 22 thru

24. lf you only need to replace the oil pressure switch, only do steps 4,5,20, and 21.

Tag wires according to general maintenance instructions (page 4-1).

4-393