BLACKOUT STOPLIGHT AND TAILLIGHT ASSEMBLY

TM9-2320-270-20-1

BLACKOUT STOPLIGHT AND TAILLIGHT ASSEMBLY

This task covers:

d. Installation (page 4-381)

b. Disassembly (page 4-378)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, blackout light to rear

Extension, 6-inch, 3/8-inch drive

cross member (two required)

Handle, ratchet, 3/8-inch drive

Packing

Screwdriver, cross-tip, number 2

Tag, marking (item 18, appendix C)

Screwdriver, flat-tip, 3/16-inch

Socket, 9/16-inch, 3/8-inch drive

Personnel Required

One

ACTION

REMARKS

ITEM

LOCATION

NOTE

To change lamps go to disassembly. It is not necessary to remove light assembly to

change lamps.

REMOVAL

NOTE

Steps in this task are same for either left or right blackout stoplight and taillight. Wire

numbers are the same for both blackout taillights. Left blackout stoplight and taillight is

shown.

Tag wires according to general maintenance instructions (page 4-1).

Plug (3)

Unplug.

1. Lead 23 (1) to

wire 678 (2)

Plug (6)

Unplug.

2. Lead 24 (4) to

wire 680 (5)

4-376