HIGH BEAM INDICATING LAMP ASSEMBLY

TM 9-2320-270-20-1

HIGH BEAM INDICATING LAMP ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

CAUTION

Light switch must be off before changing high beam indicator lamp assembly to prevent

possible damage to electrical system.

1. Lamp body (1)

Lamp holder (2)

Pull out.

Lamp (3)

Push on and turn one-quarter turn

2. Lamp holder (2)

counterclockwise and take out.

Tie wrap (5)

a. Using cutting pliers, cut.

3. Wire (4))

b. Get rid of.

4. Bullet connector

Bullet plug (8)

Pull out.

(6) on wire

and lamp holder (2)

018 (7)

Lens assembly (9)

Using slip-joint pliers, unscrew partway.

6. Lens assembly (9)

Lamp body (1)

Take off.

Lockwasher (10)

a. Take off.

b. Get rid of.

Lens assembly (9)

Take out.

8. Instrument

panel (11)

INSTALLATION

NOTE

If wire or connector repair is necessary, see general maintenance instructions

(page 4-1).

Lens assembly (9)

Put in.

9. Instrument

panel (11)

10. Lens assembly (9)

New Iockwasher (10)

Put on.

Lamp body (1)

11.

Screw on.

4-278