REMOVAL - TM-9-2320-270-20-10392

TM 9-2320-270-20-1

ETHER STARTING KIT

This task covers:

c. Installation (page 4-122)

a. Removal (page 4-118)

b. Cleaning and Inspection (page 4-121)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher (four required)

Pliers, diagonal cutting

Wrap, tie (item 24, appendix C)

Pliers, slip-joint, straight-nose

Screwdriver, flat-tip, 1/4-inch,

Personnel Required

4-inch blade

Wrench, adjustable, 10-inch

One

Wrench, open-end, 3/8-inch

Wrench, open-end, 7/16-inch

Equipment Condition

Wrench, open-end, 9/16-inch

Wrench, open-end, 5/8-inch

Right side of hood open and right and left

Wrench, open-end, 7/8-inch

side panels removed (TM 9-2320-270-10).

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Ether fumes are flammable, under pressure, and can explode. To avoid serious injury

or death, do not smoke, allow open flame nearby, or hit the ether cartridge with tools.

Pull open.

Ether cylinder

1. Firewall (1)

mounting clamp (2)

Unscrew and take out.

Ether cylinder (4)

2. Mounting clamp (2)

and valve

assembly (3)

a. Using 3/8-inch wrench, unscrew and

3. Mounting clamp (2)

Two screws (5) and

take out.

lockwashers (6)

to firewall (1)

b. Get rid of lockwashers (6).

Take off.

Mounting clamp (2)

4. Firewall (1)

4-118