FUEL STRAINER, COVER, AND BRACKET

TM 9-2320-270-20-1

FUEL STRAINER, COVER, AND BRACKET

This task covers:

c. Installation (page 4-116)

a. Removal (page 4-114)

b. Cleaning (page 4-115)

INITIAL SETUP

Materials/Parts

Tools

Container

Handle, ratchet, 3/8-inch drive

Fuel strainer

Key, socket-head screw, 9/32-inch

Lockwasher (four required)

Removal tool, oil filter

Socket, 9/16-inch, 3/8-inch

Personnel Required

Wrench, box, 9/16-inch

Wrench, open-end, 3/4-inch

One

Wrench, open-end, 1-inch

Wrench, pipe plug, 9/32-inch

ACTION

ITEM

REMARKS

LOCATION

REMOVAL

WARNING

No open flames, welding, grinding, smoking, or use of heat producing devices

permitted nearby when using fuel. Fuel burns easily and fumes are explosive. Keep

battery disconnected. Failure to observe these precautions could cause serious injury.

a. Put container underneath.

Fuel strainer (2)

1. Fuel strainer

cover (1)

b. Using filter removal tool and 1-inch

wrench, unscrew and take out.

c. Get rid of fluid (page 4-1) and

strainer (2).

Using 1-inch wrench, unscrew and take off.

Two hoses (4)

2. Two elbows (3)

Using 3/4-inch wrench, unscrew and take

Two elbows (3)

3. Strainer cover (1)

out.

Using 9/32-inch pipe plug wrench, unscrew

Two plugs (5)

and take out.

Two screws (7)

a. Using 9/16-inch socket, handle, and

5. Strainer cover (1)

9/16-inch wrench, unscrew and take

Iockwashers (8),

to bracket (6)

out.

and nuts (9)

b. Get rid of Iockwashers (8).

4-114