 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
INTERAXLE DIFFERENTIAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
32.
Bearing (1)
Snapring (2)
Put on using 1/4-inch flat-tip
screwdriver.
33.
Case (3)
Bearing (1)
Press on using arbor press.
34.
New thrust washer
Put in place.
(4) and rear side
Dimples on washer face up.
gear (5)
35.
Spider (6)
Four pinion gears
Put on.
(7) and four new
thrust washers (8)
36.
Case (3)
Spider (6) with
Put in place.
gears (7) and
washers (8)
37.
Spider (6)
Front side gear
Put in place.
(9), new fiber
Make sure all gears mesh properly.
washer (10), and
two new thrust
washers (11)
38.
Case (3)
Spider case (12)
Line up scribe marks and put on.
39.
Spider case (12)
Four screws (13)
a.
Space equally and screw in.
b.
Tighten using 3/4-inch socket and
ratchet handle with 1/2-inch drive.
c.
Check for free rotation of gears
(5), (7), and (9).
d.
If gears (5), (7), and (9) turn
freely, go on to step 41.
e.
If gears (5), (7), and (9) do not
turn-freely, take out screws, take
off case (12), and reseat gears.
f.
Do steps 39a thru 39e until gears
are seated and turn freely.
40.
Four screws (13)
a.
Screw in.
b.
Using 3/4-inch socket and torque
wrench with 112-inch drive, tighten
all eight screws (13) to 80 - 100
ft-lb (108 - 135 N m) of torque.
2-882
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals