FORWARD-REAR AXLE DIFFERENTIAL - CONTINUED
INSPECTION/REPLACEMENT - CONTINUED
a. Look for cracks, breaks, and dents.
b. Look at bearing cap legs for wear.
a. Look for scratches and score marks.
(2) and bearing
b. Look for discoloration due to
Do not do step 50 unless bearing cups were removed.
50. Bearing cage (2)
Two new bearing
Using arbor press, press in.
51. Pinion gear (5)
Bearing cone (6)
Using arbor press, press on.
a. Press on until seated firmly against
shoulder using arbor press.
b. Stake face of gear (5) in six evenly
spaced places using 3/8-inch blunt-
point drive-pin punch and 3-lb ball-
Bearing cage (2)
Pinion gear (5) Put in.
Pinion gear (5)
Bearing cone (8) Put on.
and spacer (9)